Epoxy Flake Flooring in Celina, TX

What a flake floor is

A flake floor starts with a bonded epoxy base coat. While that coat is still wet, we throw thousands of colored vinyl chips across it until no base color shows. Once it cures, we scrape off loose chips, vacuum and seal everything under a clear topcoat. The chips create a speckled, granite-like look and a gentle texture. Because the pattern is busy, it hides dust, small scuffs and the fine red soil that drifts into garages throughout the year.

Why it fits life here

Homes here tend to have garages that do a lot more than park cars. They hold pool gear, sports equipment, coolers, lawn tools, golf carts and freezers. Kids come and go through them all day. A full-broadcast flake surface handles that traffic without looking dirty, and the texture gives better footing when sprinklers or a summer storm leave the floor damp. It is also forgiving if you drop a tool or drag a bin across it.

Full broadcast versus partial

A full broadcast covers the base coat completely. It produces the most texture, the strongest build and the best camouflage for dirt. A partial broadcast scatters fewer chips, leaving the base color visible between them for a cleaner, more modern look. Partial floors are a bit smoother and show more dust, so we usually recommend them for interior rooms rather than garages. We will lay out both on sample boards so you can compare.

Chip sizes and blends

Chips come in sizes from tiny specks to quarter-inch flakes. Larger chips create bolder patterns and are popular in big garages and shops. Smaller chips give a tighter, more uniform appearance. Blends range from cool grays to warm earth tones; many local homeowners pick tan and brown mixes that coordinate with brick and limestone exteriors. We stock a wide selection and can order specialty blends.

Preparation still matters most

Flake hides blemishes, but it does not fix bad bonding. Every flake project starts with diamond grinding, crack repair and a check for moisture. We pay special attention to cracks caused by the area's shifting clay soil, filling them so they do not telegraph through the finished system.

Topcoat choices

For garages we generally use a polyaspartic clear coat because it resists heat, sunlight and hot tires and cures quickly. For interior rooms with no vehicles, a high-solids epoxy or urethane topcoat can work well. We can adjust the texture by how thick the topcoat goes down: more coats make the floor smoother and easier to mop, fewer coats leave more grip.

Beyond the garage

Flake floors also make sense in mudrooms, laundry rooms, home gyms, workshops, barns, kennels, locker rooms and commercial restrooms. They hold up to rolling carts and stand up to cleaning chemicals, and they look tidy even between cleanings. Several business owners near the square have used flake in back rooms and break rooms where foot traffic is heavy.

Cove base and edges

A cove base carries the coating a few inches up the wall, creating a seamless transition that keeps water and dirt out of the corner. It makes washing the floor easier and gives the room a finished, professional look. We can also coat stem walls and steps.

Timeline and cure

Most flake garages take one to two days. You can walk on the floor the next morning and usually park on it within a few days. We will give you specific times based on the system and temperature.

Long-term upkeep

Blow or sweep out dirt, rinse with a garden hose and squeegee toward the door, and use a mild cleaner for oily spots. Avoid harsh citrus degreasers. After many years, if the topcoat dulls in high-traffic lanes, it can be lightly abraded and recoated without starting over.

Pick your blend

Contact us to see samples and get a written quote.